Product Center

The spray cooling system project at the Sinopec gas station in Chaoyang Service Area started construction on December 3, 2019, and was fully installed, debugged, and completed acceptance on December 22, 2019. The spray cooling project at the Sinopec gas station in Chaoyang Service Area uses the specially developed spray cooling equipment by Xiamen Guanyu Industrial Co., Ltd. The advantages of this equipment include energy saving, environmental protection, low carbon emissions, noise reduction, and intelligence, which are reflected in the following major aspects.

In the southern regions of our country, the summer climate is hot, and the surface temperature of dome glass can reach as high as 60-75 degrees Celsius under the sun's exposure, which leads to high indoor temperatures in shopping malls, affecting people's enthusiasm for commercial activities. The spray cooling system developed by Guanyu Company is an efficient, energy-saving, and simple cooling device. It uses water as the raw material and employs an automatic variable frequency high-pressure plunger pump to pressurize the water, forming mist particles that are sprayed out. The mist quickly diffuses in the air and falls on the glass dome, where it continuously evaporates during the diffusion process, absorbing a large amount of heat. When the mist is sprayed onto the glass dome roof, it lowers the temperature of the glass surface and the greenhouse. When the mist adheres to the dome glass, it exchanges heat with the glass, carrying away heat from the indoor environment. Additionally, when the mist adheres to the dome glass, the energy from solar radiation is absorbed and carried away by the mist, which acts similarly to shading.

Xiamen Guanyu Technology Co., Ltd. has passionately created a mist cooling system project for the Tianbao service area of the Sinopec gas station, located in the Xiangcheng District of Zhangzhou City along the Xiarong Expressway. This mist cooling project utilizes our complete set of mist cooling, dust removal, anti-static, and explosion-proof systems for upgrades and renovations. It aims to address the challenges of heat during the scorching summer for employees and to enhance dust and static electricity control at the gas station by adding a corresponding mist cooling system, bringing a refreshing breeze to the hot summer weather. Given that vehicles entering the service area for refueling generate a lot of heat, especially during the summer when queues can lead to on-site temperatures often reaching around 40 degrees Celsius, high temperatures can be detrimental to the health of the fuel attendants, and hot weather can easily irritate customers. The mist cooling system is the best tool to solve this practical problem. The principle of mist cooling involves using water to regulate the natural climate through atomization. The water is sprayed in a very fine mist, dispersing droplets in the air. During the vaporization process, the mist absorbs a large amount of heat, achieving rapid cooling. At the same time, it exchanges heat and moisture with the moving air, where the mist particles absorb heat (or sensible heat) from the air, vaporize, and evaporate, increasing the humidity of the air, thus achieving humidification. It can also remove impurities and dust from the air, accelerate air flow, neutralize excess positive ions in the air, and increase the content of negative ions, making the air fresh and pleasant, greatly improving the working and living environment. The mist cooling system is designed with health in mind, focusing on freshness, low carbon footprint, and intelligent living. It aims to create scenery, cool down, humidify, remove dust, disinfect, prevent static electricity, and promote health. By using high-pressure water treatment and atomizing nozzles, water is instantly split into billions of micron-sized water molecules, forming a structure similar to clouds and mist, which can naturally float in the air, providing a refreshing and natural feeling akin to being in a forest. People walking through it feel moist but will not easily get their clothes wet, creating a delicate, natural, and perfect experience. Additionally, it can stand alone as a scenic element or complement other related landscape features. The mist cooling machine uses water as its raw material and employs HP-2N biofilm technology for water treatment, filtering out all harmful active components, ensuring that the water used in the mist system is safe for human health. Furthermore, due to the high-pressure impact atomization method, the mist system not only generates mist particles but also releases a large amount of what is known as "air vitamins"—negative ions, which are 2000-5000 times more than those found in ordinary urban environments, enhancing human immunity and benefiting physical and mental health. In addition, it has functions for humidity control, dust removal, cooling, and odor control, effectively improving the surrounding environment. The mist cooling system is controllable and convenient. To achieve controllable and convenient mist effects, the main system adopts centralized integrated control, and can be equipped with automatic program settings and remote control systems based on customer needs, utilizing a human-machine interactive interface for user-friendly control. The system can generate mist instantly within 1-5 seconds, making large-scale and immediate mist effects possible. The mist cooling system is environmentally friendly. In terms of materials, the nozzles of the mist cooling machine are embedded with ruby, achieving zero wear for up to 100,000 hours. The components are made of stainless steel, and the overall system pursues high stability, reducing later maintenance costs and ensuring a long service life. Regarding usage costs, a 220-meter mist belt consumes 3.16 tons of water per day and 10.67 kWh of electricity per day (calculated based on regular operation time of 10 minutes per session, 16 sessions per day), achieving high savings in water and electricity. In terms of noise control, ordinary equipment does not exceed 60 decibels, and special requirements can be accommodated with soundproofing; all pipes, nozzles, and connectors are made of 304 stainless steel, ensuring easy layout and durability. The user-friendly design of the electric spray cabinet guarantees an aesthetically pleasing overall appearance. The mist cooling system is backed by mature experience. The high-pressure pump products stem from extensive experience, which has been cultivated through years of relentless effort. After years of exploration and research in the mist field, mist cooling has now established its technological advantages in this domain.

Xiamen Guanyu Technology Co., Ltd. has passionately created a mist cooling system project for the Tianbao service area of the Sinopec gas station, located at the Jinshan service area on the Xiarong Expressway in Zhangzhou's Nanjing County. This mist cooling project upgrades and transforms our complete set of mist cooling, dust removal, anti-static, and explosion-proof systems to address the challenges of heat during the scorching summer for employees and to enhance dust and static electricity prevention at the gas station. This system brings a refreshing coolness to the hot summer weather. Given that vehicles entering the service area for refueling generate a lot of heat, especially during summer when queues can lead to on-site temperatures often reaching around 40 degrees Celsius, high temperatures can be detrimental to the health of the fuel attendants, and the heat can also irritate customers. The mist cooling system is the best tool to address this situation. The principle of mist cooling utilizes the natural climate regulation of water, employing atomization to cool the air. Water is sprayed in a fine mist, dispersing droplets in the air. As the mist vaporizes, it absorbs a significant amount of heat, achieving rapid cooling. Simultaneously, it exchanges heat and moisture with the moving air, where the mist particles absorb heat (or sensible heat) from the air, vaporize, and evaporate, increasing the humidity of the air and thus humidifying it. Additionally, it removes impurities and dust from the air, accelerates air flow, neutralizes excess positive ions in the air, and increases the content of negative ions, making the air fresh and pleasant, greatly improving the working and living environment. The mist cooling system is designed to be healthy and environmentally friendly, focusing on fresh health, low carbon, and intelligent living. It aims to create scenery, cool the air, humidify, remove dust, disinfect, prevent static electricity, and promote health. By using high-pressure water treatment and atomizing nozzles, water is instantly split into billions of micron-sized water molecules, forming a structure similar to clouds and mist, which can naturally float in the air, providing a refreshing and natural feeling akin to being in a forest. People can walk through it and feel the moisture without easily getting their clothes wet, creating a delicate, natural, and perfect experience. It can be used as a standalone feature or in conjunction with other related landscape elements. The mist cooling machine uses water as its raw material and employs HP-2N biofilm technology for water treatment, filtering out all harmful active components, ensuring that the water used in the mist system is safe for human health. Additionally, due to the high-pressure impact atomization method, the mist system not only generates mist particles but also releases a large amount of what is known as "air vitamins"—negative ions, which are 2000-5000 times more than those found in ordinary urban environments, enhancing human immunity and benefiting physical and mental health. Furthermore, it has functions for humidity control, dust removal, cooling, and odor control, effectively improving the surrounding environment. The mist cooling system is controllable and convenient. To achieve controllable and convenient mist effects, the main system adopts centralized integrated control, which can be customized according to customer needs, featuring automatic program settings and remote control systems. It utilizes a human-machine interactive interface, focusing on user-friendly control. The system can generate mist instantly within 1-5 seconds, making large-scale and immediate mist effects possible. The mist cooling system is environmentally friendly. In terms of materials, the nozzles of the mist cooling machine are embedded with ruby, achieving 100,000 hours of zero wear, and the components are made of stainless steel. The overall system pursues high stability, reduces later maintenance costs, and ensures a long service life. Regarding usage costs, a 220-meter mist strip consumes 3.16 tons of water per day and 10.67 kWh of electricity per day (calculated based on the regular operation time of the mist being on for 10 minutes per session, 16 times a day), achieving high savings in water and electricity. In terms of noise control, ordinary equipment does not exceed 60 decibels, and special requirements can be accommodated with soundproofing; all pipes, nozzles, and connectors are made of 304 stainless steel, ensuring easy layout and durability. The user-friendly design of the electric spray cabinet guarantees an aesthetically pleasing overall appearance. The mist cooling system is backed by mature experience. The high-pressure pump products stem from extensive experience, which has been cultivated through years of relentless effort. After years of exploration and research in the mist field, mist cooling has established its technological advantages in this domain.