Fountain Design: Design Standards for Landscape Fountains and Misting Systems

Landscape FountainIn addition to meeting functional requirements, the fountain design in the project should also meet the requirements for fire prevention, waterproofing, frost resistance, corrosion resistance, drainage, sound insulation, and personnel evacuation of the building, as well as the installation, operation, and maintenance requirements of the water landscape fountain engineering system.
The orientation, direction, volume, and spatial environment of the building in the project should be coordinated with the fountain,Sprayfunctions. The main structure or structural components of the building should be able to bear the load of the water landscape fountain engineering system and have stability. The vibrations caused by the operation of equipment such as water pumps should not affect the operation of precision light sources like lasers.
Wholesale procurement of fountains, the embedded parts on the beams, slabs, and columns of the building should be embedded during the construction of the main structure, or fixed with expansion bolts, and the position of the embedded parts should be accurate. The reserved holes, trenches, grooves, and embedded pipes, waterproof sleeves, and electrical sleeves on the indoor floor and walls should meet the design and current national standards. The fountain design should include a machine room and a power distribution room, and facilities such as lighting, ventilation, and doors and windows should comply with current national standards. The underground machine room should be equipped with intake and exhaust equipment.
All pipeline systems passing through the pool walls and bottom should be equipped with water rings or waterproof pipe sleeves. The settlement joints and expansion joints of the pool should be set at the water level. When the pool uses a reinforced concrete structure, the longitudinal and transverse bars of the structure should be welded into a mesh and led out with flat steel as the grounding electrode for electrical equipment. The distance of the led-out flat steel should not exceed 10. For existing pools, measures should be taken to ensure proper grounding of electrical equipment.Landscape FountainThe repair passage of water buildings should comply with the following regulations: The elevation of the passage floor should be selected based on factors such as the size of the water body and wind waves. When there is no data, it should be planned according to a water level mark of not less than the water body at the location of the passage.