The design of the musical fountain should focus on safety factors.

　　Musical FountainIn addition to functional requirements, the architectural design in engineering should also meet requirements for fire prevention, waterproofing, freeze protection, corrosion resistance, drainage, sound insulation, and personnel evacuation, while also satisfying the installation, operation, and maintenance requirements of the musical fountain design system.

The position, orientation, volume, and spatial environment of the building in the musical fountain design should be consistent with the functions of the water landscape fountain. The main structural body or structural components should be able to bear the loads of the water landscape fountain engineering system and have stability. The vibrations generated by equipment such as pumps during operation should not affect the operation of precision light sources like lasers.

Embedded parts on beams, slabs, and columns of the building should be embedded during the main structure construction or fixed with expansion bolts, and the position of the embedded parts should be accurate. Reserved holes, trenches, grooves, embedded pipes, waterproof sleeves, electrical sleeves, etc. The indoor floor and wall should meet the design and current national standards. Lighting, ventilation, doors, and windows, etc. The design of buildings such as machine rooms and distribution rooms should comply with current national standards. Underground machine rooms should be equipped with ventilation and exhaust devices.

All passing throughMusical FountainThe pipes that pass through walls and bottoms should be equipped with water rings or waterproof pipe sleeves. When the settlement joints and expansion joints of the pool use reinforced concrete structures, the longitudinal and transverse reinforcement of the structure should be welded into a mesh and led out with flat steel as the grounding electrode for electrical equipment. The spacing of the led-out flat steel should not exceed 10. For existing pools, measures should be taken to properly ground electrical equipment.

The maintenance passage for the water buildings in the musical fountain design should meet the following requirements:

1. The elevation of the channel bottom slab should be determined based on factors such as the size of the landscape water body and wind waves. In the absence of data, the design should be based on the design water level elevation of the water body where the channel is located.

2. The width of the passage should not be less than 0.8m. When there is equipment transportation, its width should meet the requirements for equipment transportation.

　　3.Musical FountainThere should be pedestrian railings on both sides of the designed passage. The material, spacing, height, and color of the railings should comply with the design and current national standards. The passage should have warning signs to restrict climbing by visitors.

The safety measures for the musical fountain design should meet the following requirements:

1. When the design water depth of the musical fountain is not greater than 0.5m, protective measures such as pool walls, steps, guardrails, and warning lines should be set around the pool.

　　2.Musical FountainWhen the design water depth is greater than 0.7m, a buffer step should be made at the edge of the pool.

3. The ground of dry fountains, flood fountains, and the bottom of children's wading pools should take anti-slip measures.

5. In natural lakes and riversMusical Fountainthe design should be equipped with safety measures such as warning lines and warning safety signs.