Introduction to Music Fountain Design Company: What are the Control Methods for Custom Music Fountains?

Everyone must have seen music fountains, right? When fountain companies carry out water-soluble designs, there are many factors to consider. Apart from the visual beauty of the music performance, the actual effect as a landscape water feature must also be taken into account. Therefore, the functions in control and settings are different. So, what are the main control methods? Let's learn about them together. Music Fountain Design

　　Music Fountain DesignCompany

1. Manual Operation: During intermittent music performances in the daytime or evening, move the mouse to individually activate certain water shapes, creating a set of fixed designs that do not change. This saves energy and is more common in daily use.

2. System Control: If you expect different combinations of design changes, you can activate horizontal functions to change the water shapes according to the set program, creating different shapes and allowing people to experience the beauty of different sceneries.

3. Instant Voice Control: This is a control method commonly used by most fountain companies in our country. Its function is to respond to any audio data signals, allowing for live performances like karaoke at home. However, this control method has some drawbacks; the water shape movements may lag behind the music, making the fountain movements feel unbalanced with the music.

Moreover, the birth composition of water shapes and the duration of their occurrence are fixed and repetitive regardless of the music. Therefore, there may be inconsistencies between the performance water shapes and the meaning expressed by the music. For example, during passionate notes, there may be shaking water shapes, while during soft rhythms, there may be broad water flows, leading to a mismatch between auditory and visual experiences.

　　Music Fountain DesignCompany: What should be done for the daily maintenance of the fountain?

1. Music Fountain Engineering Equipment Water Quality

The saturation of the water quality in music fountain engineering equipment should not exceed 15 degrees, and it should not show other colors or have a turbidity of more than 10 degrees; it should not contain visible substances. The impurity content in the water should not exceed 0.1%, and the residue particle size should not exceed 0. Chloride ions should not exceed 400 mmm/L, and the pH value should be within the range of 6.5 to 8.5. It is also necessary to pay attention to the recycling of water used in fountain equipment. When the nozzle has standards, the cooling circulating water should be filtered. The flow rate of the circulating replenishment water should be determined based on evaporation, light wind, industrial wastewater, and other damages. Generally, 5% to 10% of the flow rate of the circulation system should be selected.

2. Nozzles

Nozzles should be regularly cleaned and maintained. When assembling, pay attention to the tightness of the connection between the nozzle and the pipeline. When installing the nozzle, a layer of material tape should be wrapped at the joint to prevent water leakage, which would affect the watering effect. At the same time, safety measures should be taken.

3. Underwater Lanterns

Underwater lanterns are among the most easily damaged components of fountain equipment, so their daily maintenance is also very important. Lanterns can be protected with heat shrink tubing and hot melt glue; when assembling lanterns, ensure that the gaps between the lantern and the lamp holder are connected and not loose; after welding the lamp pieces in the pipeline, they must be welded to prevent the lamp pieces from falling off during use; after assembly, they should be soaked in 5% saline solution for 72 hours, and only after measuring the resistance and meeting the standards can they be used.